Boost Pump for Sprinkler Systems: Everything You Need to Know
Looking to boost your sprinkler system and ensure even coverage of your lawn? A boost pump may be the solution you need! This blog post will discuss everything you need to know about boost pumps for sprinkler systems. We will cover what a boost pump is, how it works, and why you need one. Plus, we will provide tips on choosing the right booster pump for your needs. So if you’re ready to learn more about boosting your sprinkler system, keep reading!
Table of Contents
Best Boost Pump for Sprinklers
If you have a sprinkler system that doesn’t produce enough water pressure, you need to buy a booster pump. Booster pumps are designed to increase the water pressure and flow from your sprinkler system to your lawn or garden.
If you have a big lawn or your water source is not strong enough, you might need to increase the water pressure for your irrigation system. In addition to boosting water pressure, a booster pump can speed up water flow through your pipes. Water pressure is the most likely culprit if your irrigation system isn’t performing properly. Use a booster pump to get the most out of your irrigation system.
There are different types of booster pumps. Many booster pumps are available for residential (lawns and gardens) and commercial (playgrounds and parks) use. It is also possible to boost water pressure using booster pumps. For example, suppose you have an irrigation system that requires 85 PSI of water pressure to work. In that case, your irrigation system is only getting 60PSI from the mainline. You’ll need a booster pump to get your irrigation system to work.
Considerations Before Buying a Booster Pump
If your sprinkler is not working well, you might need a booster pump. When choosing a booster pump, you need to think about things like your current irrigation system, the design of your lawn, the size of your lawn. Where your water pipes are located, and the water pressure from your mainline. For your irrigation system to function properly, you must also consider how much pressure the booster pump must provide.
If you need 85 PSI of water pressure for your water pump, find a booster pump that can produce that amount of pressure. Before purchasing a booster pump, you should think about several factors, including your budget and the size of the pump.
Size and Pressure
You need to know the PSI and GPM of your sprinkler head to figure out how much water your system needs. Sprinkler system pressure requirements are the technical term for this. Most water sprinkler systems use a constant head rating, so finding this information is difficult. Once you have it, multiply the GPM by the number of heads you use for a specific period.
If you produce 10.6 GPM heads at 40 PSI, you need a booster pump that can do 60 GPM at 40 PSI or more. Your irrigation system will be damaged if you do not get the booster pump’s size and pressure just perfect.
Power of Existing Irrigation System
Some places have low water pressure, so they install booster pumps to ensure they get the most out of it. Some of these places have old irrigation systems. Sometimes, the existing irrigation system is not compatible with the pressure coming from the mainline. For example, an irrigation system might need 85 PSI of water to work, but only 60 PSI is coming in. In this case, a booster pump would be added to the existing irrigation system to boost its pressure.
Power of Existing Irrigation System
Some places have low water pressure, so they install booster pumps to ensure they get the most out of it. Some of these places have old irrigation systems. Sometimes, the existing irrigation system is not compatible with the pressure coming from the mainline. For example, an irrigation system might need 85 PSI of water to work, but only 60 PSI is coming in. In this case, a booster pump would be added to the existing irrigation system to boost its pressure.
Pump Location
Adding a booster to your sprinkler system will work well if the pump is installed close to the water source. On the other hand, the booster should be situated on level ground, and the pump should be high enough to reach all of your lawn or garden.
Distance to System
The efficiency of your pump is also influenced by the distance from the pump to the discharge pipe. If you want the best pressure, but the pump as close to the output line as possible. The one-inch pipe should be used for sprinkler heads at least 100 feet from the pump. It’s best to utilize a 2 12 inch pipe if your sprinkler head is between 300 and 600 feet wide,
Power Supply
A standard-sized booster pump requires electricity. In most cases, it requires either 115 or 230 volts of power. A 230-volt power outlet (or higher) or a 3-phase power source (or more than 2.5 horsepower) is necessary if you have a larger power pump.
There are power pumps that can be powered by solar panels or gas generators. Choose the type of pump that will fit your available power source, depending on what is available in your area.
Robust Motor
When looking for a booster pump, choose one with a TEFC motor. This type of motor is made of materials that resist corrosion, making it more durable. Make sure the pump also comes with an IP55 international protection rating.
Maximum Pressure
At least 1.5bar(21.7psi) of water pressure. A sufficient supply of electricity is thus ensured.
The water pressure of your sprinkler system will not improve if you use a booster pump with a maximum output of 1.5 bar (21.7 psi).
Automatic Settings
A booster pump with automatic settings is easier to use than a manual one. Using an automated pump eliminates the need for manual setup. You need to push a button, and it will start working.
Top Booster Pumps for Sprinklers
1. Shallow Well Sump Pump 1.6HP Booster Pump Stainless
This Shallow Well Sump Pump Stainless Booster Pump is a powerful pump that can run on a 1200W/1.6HP power supply. It has a 115-volt motor that can easily pump water up to 23 feet high.
This water pump has 66 PSI of water pressure. That is enough to keep your irrigation system going. It also has a 700 GPH production, which means it can easily water your lawn. It also has a self-priming design, set up as an automatic sprinkler system.
This booster pump is compatible with wells. If you use well water to irrigate your garden, this pump will help you do that. It can also help you refill your pool. It’s ideal for ponds, irrigation systems, huge aquariums, and sprinklers because of its 1.6 HP Shallow Well Sump Pump Stainless Booster Pump.
2.1 HP Portable Lawn Sprinkler Pump
This stainless-steel booster pump from AmazonCommercial is very durable. It can produce 21 gallons of water per minute or 1260 gallons in an hour.
This pump is easy to carry around because it has a portable handle. It also has an on/off switch. This pump has a vertical water lift of 165 feet, which is another amazing feature. This pump comes with a 10-foot grounded waterproof cord, a 3/4″ garden hose adapter, and a 1″ FNPT discharge.
3. 1 1/2 HP 50 GPM Cast Iron Sprinkler Pump
When it comes to booster pumps, Red Lion’s RLSP150 1-1/2-HP 50 GPM Cast Iron Sprinkler Pump is one of the best on the market. It comes with a sturdy pump base that will make it easy to mount in any location you need.
This pump has a 1.5 HP engine. It can produce 89 GPM of water at 47 PSI, even 25 feet away. You can use the 2-inch suction and discharge hose to suck up and get water from 150 feet away.
A 115-volt power outlet is required to power this pump. Just make sure the pump’s body is constantly protected from the weather for routine maintenance.
4. Pump Sprinkler 1.5Hp FP5172
One of the best booster pumps is the Flotec FP5172 Pump Sprinkler 1.5Hp, fiberglass-reinforced thermoplastic. It is 1.5 horsepower. Nothing about it corrodes. 30 different sprinkler heads can be attached to this high-capacity pump.
This booster pump from Flotec is designed to self-prime. This means it can be used as an automatic sprinkler for de-watering and water transfer. It also offers a maximum pressure of 47 PSI. This pump delivers 115/230 motor voltage and has a dual voltage capability (15 amp for 230v / 25 amp for 115v).
5. BACOENG 1.6HP Stainless Booster Pump
Irrigation systems, cabins, and swimming pools can benefit from the BACOENG’s 1.6HP stainless booster pump. This pump has 1.6HP of power and can produce up to 700 GPH.
This booster pump is perfect for people who want to have an unlimited water supply for their lawn, pool, or large aquarium. The long lifespan of stainless steel construction is a major benefit. It also has a carry handle for convenient transportation. This pump’s on/off button makes it simple to operate, and it can be installed in minutes.
To boost water pressure in your home, use the BACOENG Stainless Booster Pump. It comes with a 23-foot suction capability, drawing water deep in the ground. It also has thermal overload protection to keep it from overheating.
To learn more information about how to select the right booster pump, visit this website.
Frequently Asked Questions About Boost Pump for Sprinkler System
